DFU Flasher
WebUSB DFU flasher. Use it after entering DFU mode from the dashboard to write firmware to the Bluepill application region.
WebUSB
Checking…
DFU Device
Disconnected
Target Address
0x08001000
Selected Image
None
Flash Setup
No file selected.
Progress
Idle
Percent
0%
Flashing Notes
Chrome or Edge on desktop is required. WebUSB is not broadly available
elsewhere.
This page is aimed at the FOC project DFU bootloader and normal application
image layout.
If the board does not leave DFU automatically after flashing, unplug and
reconnect it once.